update Updated: 07/11/2018
For the Robo R1, you will need to print these files, already oriented as needed. Here are a few recommendations for printing:
This is your last print without Zimpure!
First, install the Robo R1 suction head that you downloaded above on your extruder.
Then, insert the hose into the R1 Suction Head and plug the other side of the hose into Zimpure.
Here you go, your Zimpure is ready to filter! You need to turn it ON only after than your R1 has started to print. Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. Happy safe printing!